Skip to content
Whatspp/Phone:
+8618666402929
Email:info@shinysteeljewelry.com
Factory address:
No. 5 Changsheng Road, Chang’an Town, Dongguan City, Guangdong Province, China.
Build a coordinated collection or develop a single product category. Share the details that define your brand, from proportions and surface texture to clasps, engraving and packaging.
Develop chains, pendants and necklace components with your preferred dimensions and gold-tone finish. Discuss how the chain, pendant and clasp should look together.
Customize bracelet lengths, bangle dimensions, closures and branded details. Include any requirements for movement, fit and matching components in your brief.
Share your ring profiles, size range and preferred surface finish. Highlight areas that may experience frequent contact so they can be considered during sample review.
Develop hoops, studs and other earring styles with suitable construction and finish requirements. Specify the materials needed for posts, backs and other components.
A gold finish should be assessed against more than a product photo. For your custom PVD gold jewelry project, define how the finished pieces should look, function and perform before approving bulk production. Use your approved sample and agreed specifications to establish the inspection reference. Share any additional testing or reporting requirements at the quotation stage so the scope, arrangements and costs can be confirmed.
Compare the gold-tone finish with the approved reference, including visible differences between chains, clasps, pendants and matching pieces. Review polishing marks, uneven appearance and other surface details against agreed acceptance criteria.
For PVD-coated stainless steel jewelry, identify the base material and required coating specification. If thickness measurement is required, confirm which layer is being measured, the method and the measurement locations.
Discuss how the finish will be evaluated for your product’s intended use. Rings, bracelets and necklaces experience different contact and movement, so the selected checks should reflect the design and relevant wear conditions.
Where required, agree on salt spray or other exposure testing for the identified samples. Define the conditions and acceptance criteria before testing, rather than relying on a test duration alone.
Check the approved dimensions and the operation of clasps, hinges and other moving components. The finished jewelry should be reviewed for both its appearance and its intended function.
Agree on the inspection records needed for your order, along with product identification and packing requirements. If a test report is requested, confirm that it identifies the tested sample, method and results.
A note on durability: Salt spray results describe performance under specified test conditions. They do not translate directly into years of wear or establish resistance to every type of exposure.
Explore design references for your next collection, from simple everyday pieces to distinctive statement styles. Each design can be discussed with your preferred dimensions, gold-tone finish and branded details. Select a style as a starting point, or send us your own design for OEM/ODM development.
| Check | The Question It Helps Answer |
|---|---|
| Appearance & Color Review | Does the finished product match the agreed visual reference? |
| Coating Thickness Measurement | Does the specified layer or coating system meet the agreed requirement at the defined measurement locations? |
| Adhesion Evaluation | How does the coating respond under the selected adhesion assessment? |
| Wear / Abrasion Evaluation | How does the surface perform under a defined rubbing or wear procedure? |
| Salt Spray Testing | How does the tested sample respond to a controlled corrosive environment? |
| Application-Specific Exposure | What happens under agreed conditions relevant to the intended use, such as artificial perspiration? |
A finish specification should explain more than its color. Tell us how the jewelry will be used, which performance requirements matter to your brand and what evidence you need before approval.
The test scope, method, acceptance criteria, cost and reporting arrangements should be agreed for each project.
Explore how custom stainless steel jewelry with PVD gold finishes can fit your product range. Each project starts with your design direction, target customer and finish requirements.
Develop necklaces, rings, bracelets and earrings for your everyday collection. Define the proportions, comfort and gold-tone appearance, then discuss performance requirements based on how the pieces are intended to be worn.
Create matching pieces across multiple product categories. Review the gold color, surface texture and visible components together so the collection follows a shared design and finish reference.
Develop distinctive shapes, custom pendants, branded clasps and engraved details. Share your sketches or references to discuss how your brand identity can be incorporated into the finished jewelry.
Plan a capsule collection, seasonal launch or branded gift range. Coordinate product designs, packaging and target delivery dates, allowing time for sampling and approval before production.
A difference in gold color, surface appearance or component finish can affect how your collection is presented and sold. For custom PVD gold jewelry, identifying the difference is only the first step.
Products identified as outside the agreed requirements are separated for review. The affected portion of the order is held while the issue and next steps are assessed.
We compare the issue with the approved sample or specification and share relevant photos, available inspection findings and the confirmed scope of the problem.
Depending on the issue, options may include rework, replacement or an agreed adjustment to the delivery plan. Feasibility, timing and any cost implications are clarified before action is agreed.
Corrected products are checked against the agreed release criteria. Where the issue requires a process change, the action and follow-up verification are recorded for future production.
Confirm your design, PVD gold finish and quality requirements before your collection moves into production.
01
Send your sketches or reference images, preferred stainless steel grade, gold-color reference and estimated quantity. Include your target delivery date and any branding requirements.
02
Review product construction, surface texture, PVD finish requirements and sampling costs. Agree on any testing, documentation and packaging needs for your project.
03
Review the sample’s dimensions, gold color, surface finish and component function. Confirm any revisions and approve the sample and specifications before bulk production.
04
Proceed with the approved specifications and agreed finish reference. Complete the agreed quality checks and prepare your jewelry for shipment with the confirmed packaging.
This service focuses on stainless steel jewelry with PVD gold finishes. Solid gold, gold-filled and gold vermeil are different material constructions. Please identify your required base material and coating composition when requesting a quotation.
Yes. We work with sketches, reference images and technical specifications for OEM/ODM development. Share the product dimensions, materials, finish and branding requirements so we can review the project before sampling.
Our MOQ starts at 50 pieces per style. Different sizes, finishes, custom components and packaging may affect the applicable minimum. Send your quantity breakdown so the requirements can be confirmed.
Yes. Color and surface appearance should be reviewed during sampling. A physical reference is preferable to relying only on photographs. For a coordinated collection, include the visible components and matching products in the review.
There is no single lifespan that applies to every PVD-coated jewelry item. Performance depends on the coating system, surface preparation, product design, friction, exposure and care. Discuss the intended use and suitable evaluation requirements before approval.
No. A thickness figure needs to identify the layer being measured, the measurement method and the location. Coating composition, adhesion, surface preparation and product geometry also matter. Compare complete specifications rather than one number.
The term needs defined conditions and supporting evidence for the finished product. Exposure to fresh water, sweat, pool water, salt water and cleaning products should not be treated as equivalent. Discuss the intended claim and evaluation scope before using it in your product marketing.
Please specify the tests and documentation you need at the enquiry stage. We will confirm the available arrangements, sample requirements, costs and reporting scope for your project. A report should identify the tested sample and the conditions used.
Repeat-order requirements should refer to the approved finish specification and retained reference sample. Comparison methods and any agreed tolerance should be clarified before production, especially when several components or surface textures are involved.
Send reference images or drawings, the product category, dimensions, base material, desired finish and quantity per style. Include logo, packaging, testing requirements and your target delivery date where available.
Yes. We can manufacture rings in US, UK, or EU sizing standards. We use calibrated ring mandrels to ensure accuracy within +/- 0.1mm.
Yes. We can manufacture. Yes, full private label support including custom cards, pouches, boxes, and barcode/SKU labeling for retail-ready ring collections.
